Custom Search

Tuesday, April 28, 2009

washer dryer

If cloths are dying slowly, check for a clogged lint filter. Otherwise, the voltage at the receptacle may need inspecting. The voltage should read betwee4n 220 and 240 volts. Not enough voltage or clogged lint will cause in sufficient heat to dry cloths. However, the mechanical parts are more likely to fail, then the electrical Unit.; by making sure there is power at the outlet.

In sum, by having the lint unclogged, the safety thermostat will not shut off the heat, due to clogged lint – by having the dryer vent cleaned.


(Album / Profile)

Len Wilson

BBB Reliability Program Member

No comments: